NACA 0012 AEROFOIL WITH TAPPINGS
A 150 mm chord 300 mm span NACA0012 aerofoil with pressure tappings for use with the AF100 Subsonic Wind Tunnel.
ESSENTIAL BASE UNIT:
The AF102 is part of a modular system and needs the following base unit
An open circuit suction subsonic wind tunnel with a working section of 300 mm by 300 mm and 600 mm long.
A starter set consisting of the AF100 Subsonic Wind Tunnel, AFA2 Basic Lift and Drag Balance and a set of AF109 Three Dimensional Drag Models.
Required supporting products for the AF102
A tilting 36-tube manometer for use with the AF100 Series Subsonic Wind Tunnel, other TecQuipment products, or as a general purpose instrument.
Optional supporting products for the AF102
The AFA5 Differential Pressure Transducer is an optional ancillary for TecQuipment's AF100 Subsonic Wind Tunnel to measure and display pressures with respect to the atmosphere or differential pressures.
The AFA6 32-Way Pressure Display Unit is an optional ancillary to the AF100 Subsonic Wind Tunnel that measures and displays up to 32 different pressures from models Pitot-static tubes and other measuring instruments fitted to a wind tunnel.
A traversing pitot static tube with electronic position measurement.
For use with TecQuipment's AF100 wind tunnel.
Products with similar functionality to the AF102
An experimental module for use with the AF10 Air Flow Bench (not included) to provide the facilities for investigating the pressure distribution around an aerofoil.