SET OF 2 NACA 0012 AEROFOILS
A set of two aerofoils both of NACA0012 profile and 150 mm chord for use with the AF100 Subsonic Wind Tunnel.
ESSENTIAL BASE UNIT:
The AF104 is part of a modular system and needs the following base unit
An open circuit suction subsonic wind tunnel with a working section of 300 mm by 300 mm and 600 mm long.
A starter set consisting of the AF100 Subsonic Wind Tunnel, AFA2 Basic Lift and Drag Balance and a set of AF109 Three Dimensional Drag Models.
Required supporting products for the AF104
A two component balance to measure the lift and drag forces on models mounted in an AF100 Subsonic Wind Tunnel.
A three-component balance designed for use with the AF100 Subsonic Wind Tunnel.
Optional supporting products for the AF104
The AFA4 Angle Feedback Unit is an optional ancillary for use with an AFA3 Three-Component Balance to measure the angular position of models mounted on the balance in an AF100 Subsonic Wind Tunnel.
The AFA5 Differential Pressure Transducer is an optional ancillary for TecQuipment's AF100 Subsonic Wind Tunnel to measure and display pressures with respect to the atmosphere or differential pressures.
A traversing pitot static tube with electronic position measurement.
For use with TecQuipment's AF100 wind tunnel.
Products with similar functionality to the AF104
An experimental module for use with the AF10 Air Flow Bench (not included) to provide experiments that measure and compare the effects of drag force on objects mounted in an airstream that have the same projected frontal area but different shape. Facilities to compare drag force measurement methods are included.