Túneles de Viento Subsónicos

Set of two vehicle drag models
A generic model van and car to allow students to compare the different coefficient of drag for each vehicle. If using the optional smoke generator (AFA11) the flow of air around the vehicles can be observed.

Flutter Wing

An aerofoil suspended on springs within a frame, used to demonstrate wing flutter. The suspension positions of the wing can be altered, as can the angle of attack.

Aircraft Model - High Wing
The high wing model aircraft with NACA profile wings for use with the Large Subsonic Wind Tunnel (AF1600) is good for experiments with lift, drag and pitching moment of fixed wing aircraft.

SUBSONIC WIND TUNNEL 600mm

An open circuit suction subsonic wind tunnel with a working section of 450 mm by 450 mm and 1000 mm long. Package includes the Aerofoil with Tappings, a Three-Component Balance, two Differential Pressure Transducers, a 32-Way Pressure Display Unit and data acquisition (VDAS-F).

Aircraft Model - Low Wing
A low wing model aircraft with NACA2415 profile wings for use with TecQuipment's Large Subsonic Wind Tunnel (AF1600S)

Three-Dimensional Drag Models
A set of different shape models for use with the Large Subsonic Wind Tunnel (AF1600S) each with identical frontal area to allow students to compare the different coefficient of drag for each shape. Includes a dummy stem for tests to cancel out the drag due to each model’s support arm.

NACA2412 Aerofoil with Variable Flap
A 150mm chord NACA2412 aerofoil with 590 span featuring a variable flap that adjusts +/- 90 degrees for use with the AF1600 Subsonic Wind Tunnel.

NACA0012 Aerofoil with Tappings
A 150 mm chord NACA0012 aerofoil with 595 mm span and 20 static pressure tappings.

Flat Plate Bundary Layer Model Roughened and Smooth
A pair of boundary layer models with a mounting plate, also a pitot and a static probe for investigating boundary layer. One plate is roughened, the other smooth to allow comparisons on boundary layer growth.

Cylinder Model with Pressure Tapping
A cylinder model that spans the full width of the working section of the AF1600S Subsonic Wind Tunnel. A holder (included with the wind tunnel) supports the model in the tunnel.

BANCO DE FLUJO DE AIRE MODULAR
Un banco completamente móvil para proporcionar a las instalaciones de un flujo básico de aire y permitir una amplia gama de investigaciones prácticas del flujo de aire. Apto para trabajos de demostración, en laboratorios y proyectos a nivel básico.

SUBSONIC WIND TUNNEL 300mm

An open circuit suction subsonic wind tunnel with a working section of 300 mm by 300 mm and 600 mm long.
MORE RANGES
-
Aerodinámica
-
Mecánica de Fluidos
-
Motores
-
Ingeniería de Control
-
Control de Procesos
-
Pruebas de Materiales y Propiedades
-
Control Ambiental
-
Ciencias de Ingeniería
-
Termodinámica
-
Sistemas de Energía Eléctrica
-
Estructuras
-
Teoría de las Maquinas
-
Energías Renovables
-
Fundamentos de la Estática
-
Sistema Versatil de Captura de Datos (VDAS)