A 300 mm wide, 5 to 15 m long flume for student study and advanced research into a wide range of fluid flow topics. A huge range of ancillaries are available to extend learning potential and offers the opportunity for innovative experimentation.

Digital image correlation (DIC) system designed to enhance the student learning experience, for real-time and post-process measurement and visualisation of deformations, strains and displacements in materials and shapes. Complements the teaching equipment.

Digital image correlation (DIC) system designed to enhance the student learning experience, for real-time and post-process measurement and visualisation of deformations, strains and displacements in materials and shapes. Complements the teaching equipment.

The TecQuipment Hydro-Electric Turbine is a versatile, floor-standing, self-contained apparatus for demonstration of hydro-electricity. It is supplied with five different propellers. The product focuses on exploring the best efficiency point of different propellers and perform energy audits to analyse system performance.

This is a versatile, compact apparatus for teaching the fundamentals of kinetic wind energy conversion into electrical power. Flexibility is at the core, it has a castor-mounted frame for mobility and functionality and allows students to 3D-print their own blades for advanced experimentation.

An open circuit suction subsonic wind tunnel with a working section of 300 mm by 300 mm and 600 mm long.

Practical demonstration of the equilibrium of a ladder.

Allows Students to investigate the free and forced vibration of a rigid beam and spring, and a simply supported beam.

For experiments in balancing a rotating mass system, statically and dynamically

An apparatus to allow investigations and demonstrations into the operation and performance of a high efficiency photovoltaic cell array and battery storage system.

An experimental unit to show how cross-flow water to air heat exchangers work.

A vertical work panel printed with a metric grid. For use with the STF range of experiments.

A bench mounted beam apparatus to allow students to investigate the deflections and reactions in simply supported and cantilevered beams.

Investigates short, medium and long transmission line performance in single-phase and three-phase systems.

Based on the Turbo Jet (GT100) this product has a reheat (afterburner) section for in-depth examination of a working gas turbine.

A mobile trolley with a complete set of TecQuipment’s Engineering Science kits and three Work Panels.

Demonstrates the operational characteristics of an evaporative cooling tower.

A fully integrated and self-contained bench top process control apparatus containing valves, pumps, power supplies and ancillaries to allow flow, level, temperature and pressure control strategies to be investigated individually and in combinations.

Provides a physical system on which students can gain experience in the programming of programmable logic controllers (PLCs). The process is a model of a two-tank system typical of a chemical process in which liquids are measured before being mixed. The task for the student is to control liquid level and flow. For use with the PLC Trainer (CE123).