STR18 - Experiment

An experimental apparatus to allow students to investigate the reactions and deflections of a loaded rectangular portal.

PDF datasheet

The experiment hardware fits onto a Structures Test Frame (STR1, available separately). The hardware includes two rectangular portal frames with the same dimensions. However, one of the frames has a constant second moment of area, while the other has one leg with a smaller second moment of area. 

Students clamp each leg of one of the portal frames to supports attached to the test frame. They then load the top of the portal frame using masses on a hanger. Load cells on the supports connect to a Digital Force Display (STR1a, available separately). These measure the moment at one end of the portal frame and the horizontal reaction at the other. A digital deflection indicator measures sway at the top of the portal frame. 

Students use the results of moments and reactions to plot bending moment diagrams. They compare the bending moment diagrams, the direction of sway (and its causes) to theoretical calculations. They then repeat the experiment using the other portal frame. 

The lecturer guide provides details of the equipment including sample experiment results. The student guide describes how to use the equipment and gives experiment procedures. 

For extra ‘virtual’ experiments, TecQuipment can supply the optional TecQuipment Structures Software (STRS), for use on a suitable computer. The virtual experiments simulate the tests you can perform with the hardware. They also extend the choice of tests beyond that available using only the hardware, for example: higher loads, uniform loads or different test specimens. This extends the student’s learning experience. 

For automatic data acquisition of your experiment results, TecQuipment can supply the optional Automatic Data Acquisition Unit (STR2000). Supplied as standard with the STR2000 is TecQuipment’s Structures Software that displays and logs your experiment results and gives the extra virtual experiments.

Study and comparison of load, horizontal reactions, fixing moments, sway and shear force in a:

  • Rectangular portal with a uniform section
  • Rectangular portal with a non-uniform section
STR1 - Base Unit

A sturdy lightweight aluminium bench-mounting frame to provide rigid support for the interchangeable experimental modules in TecQuipment's Structures Range (STR2 -STR20).

STR1A - Ancillary

A hardware module to simultaneously measure and display the output of up to 4 force sensors mounted on experiments in TecQuipment's Structures Range (STR2 -STR20).

STR2000 - Ancillary

A computer interface module with ADA software that allows the hardware experiments in TecQuipment's Structures Range to be interfaced to a PC.

STR20 - Experiment

Allows students to investigate the sway, strains, stresses and therefore bending moments of a horizontally and vertically loaded rectangular portal.