VDAS TD1002 - Experiment

HEAT TRANSFER EXPERIMENT BASE UNIT

PDF datasheet

A base unit to support various experiments that demonstrate heat transfer.

OR CALL US TO DISCUSS+44 1159 722 611

HEAT TRANSFER EXPERIMENT BASE UNIT

The Base Unit (TD1002) is the core of the TD1002 range. It provides cold water and heater power to the optional experiments and all the instruments needed to measure their performance.

The Base Unit’s water system connects to a suitable cold water supply and drain. It includes a hand-operated valve to help give a controllable water flow and a simple return pipe, both colour-coded.

The water connections to the optional experiments are self-sealing quick connectors – for safety and simplicity. The inlet and outlet fluid streams have different colours to reduce errors. Changing an experiment takes less than a minute. The Base Unit provides a variable and measured electrical current to the heater in each experiment and works with a safety switch to stop the heater from becoming too hot. It also includes sockets for the thermocouples built into each optional experiment.

Clear, multi-line digital displays on the Base Unit show the temperatures and heater power of each experiment. A spare area to the right of the Base Unit frame allows you to fit the optional VDAS-F hardware.

Each optional experiment is on a bedplate that has a clear schematic diagram showing the connections and measuring point positions. The bedplate fixes to the Base Unit with thumbscrews (students need no tools).

Note: You need at least one of the optional experiments. You cannot do experiments with just the Base Unit. You can do tests with or without a computer connected. However, for quicker tests with easier recording of results, TecQuipment can supply the optional Versatile Data Acquisition System (VDAS®). This gives accurate real-time data capture, monitoring and display, calculation and charting of all the important readings on a computer.

case study
University of Northwestern St Paul Builds New Engineering Program

When the University of Northwestern St Paul, located in Minnesota in the USA, set out to build new labs while meeting USA degree accreditation requirements, they scoured the educational teaching equipment market for a supplier that could deliver:

  • High quality products and customer service
  • Competitive prices
  • Purpose-built equipment with teaching flexibility in mind
  • A single supplier source for the majority of the practical teaching needs

Read the full case study here.

HEAT TRANSFER EXPERIMENT BASE UNIT
SUPPORTING PRODUCTS
VDAS TD1003 - Experiment

A benchtop unit to show the laws of radiant transfer from heat and light sources

VDAS TD1005 - Experiment

An experimental apparatus to examine free and forced convection from a flat plate, a plate with fins and a plate with rods.

TD1002A - Experiment

An experimental module to introduce students to the principles of linear heat conduction, and to allow the thermal conductivity of various materials to be measured.

TD1002B - Experiment

An experimental module to introduce students to the principles of radial heat conduction, and to allow the conductivity of the test disk to be measured.

TD1002C - Experiment

An experimental module to show the temperature gradient of a long thin horizontal member that is free to loose heat by natural convection and radiation.

TD1002D - Experiment

An experimental module to show the thermal conductivity of various compatible liquids and gasses.

VDAS-F (mkII) - Ancillary

A frame mounting versatile data acquisition system (VDAS) to allow computer-based data capture for a wide range of TecQuipment products.

NEED MORE INFORMATION?

We're here to answer your questions

Subscribe